张立峰

张立峰，男，1972年8月出生于河北丰润。他于1998年在北京科技大学获得冶金工程专业博士学位，并成为该校冶金与生态工程学院的院长、教授和博导。他还是教育部长江学者特聘教授、美国自然科学基金会主审评委和中国自然科学基金会材料学部国际评委。他的研究方向包括洁净钢和非金属夹杂物、铝和硅的净化和循环再利用以及冶金过程数值模拟仿真。他曾获得美国钢铁协会连续铸钢最佳论文奖和美国材料金属及矿业协会青年领袖奖。目前，他担任北方工业大学的党委副书记和校长。

时间院校专业学位xx-1993重庆大学-学士xx-1998北京科技大学冶金工程博士

2012年初回国任北京科技大学冶金与生态工程学院院长。

历任日本东北大学工学部日本学术振兴会外国人特别研究员、美国伊利诺大学香槟分校机械工程系Research Scientist、挪威科技大学材料科学与工程系教授、美国密苏里科技大学材料科学与工程系助理教授、副教授。

2022年1月，任北方工业大学党委副书记、校长。^[1]

纯净钢与夹杂物，纯净金属（钢铁、铝、太阳能用硅）的净化、连铸和循环再利用，金属制备过程中的流动、传热、传质、凝固的数值模拟仿真，太阳能用硅和电子废弃物的绿色回收工艺及基础研究。

已经发表230多篇科研论文，其中刊物论文100多篇，多数为国际发表。至2011年9月为止，文章被SCI检索50多篇，EI检索140多篇。所发表的文章被他人引用至少500多次；承担了9项纵向课题，包括自然科学基金重点项目；承担了36项企业项目，涵盖了国内宝钢、首钢在内的18家钢铁公司；发表英文刊物论文30篇、中文刊物论文19篇、国内外会议论文60余篇；被授权3项发明专利、27项实用新型专利。为国内外60多个刊物评审稿件。

在国际、国内会议、企业、大学做过160余次演讲，其中多次为主办方邀请。是过程冶金类国际刊物Metallurgical and Materials Transaction B . 和Iron and Steel Technology 审稿委员会委员（Key Reader）。受邀先后为26个国际刊物审理稿件。多次组织主持国际会议，如美国矿物、金属与材料协会（TMS）年度国际会议、美国钢铁协会（AIST）年度国际会议、国际太阳能会议、材料科学与技术国际会议、国际资源回收会议等等。

承担和参与了60多项国际研究课题，课题来源：美国自然科学基金、美国能源部、美国国防部、美国模铸冶金学会、挪威学术理事会、欧盟研究基金、德国研究理事会、日本学术振兴会、和一些世界著名的钢铁企业（例如纽柯钢铁、宝钢）、铝业公司（例如海德鲁铝业、美国铝业）、光伏用硅企业等等。

论文

1.Ying Ren,Lifeng Zhang,Shusen Li.“Transient Inclusions Evolution during Calcium Modification in Linepipe Steels,”ISIJ International,Vol.54,No.12,pp.2772-2779

2.Ying Ren,Lifeng Zhang, Wen Yang, Haojian Duan. Formation Mechanism and Thermodynamics of Mg–Al–Ti–O Complex Inclusions in Mg-Al-Ti-Deoxidized Steel,Metallurgical and Materials Transactions B,Vol.45B,No.6, 2014,pp.2057-2071

3.Shengqian Wang, Lifeng Zhang, Anping Dong, Jianwei Gao, Lucas Nana Wiredu Damoah. “Application of Electromagnetic (EM) Separation Technology to Metal Refining Processes: A Review,” Metallurgical and Materials Transactions B, Vol.45B, 2014, No.6, pp. 2153-2185

4.Shengqian Wang, Lifeng Zhang, Yue Tian, Yanlong Li, Haitao Ling. “Separation of Non-metallic Inclusions from Molten Steel Using High Frequency Electromagnetic Fields”, Metallurgical and Materials Transactions B, Vol.45B, No.5,2014,pp.1915-1935

5.Lifeng Zhang,Xiaogang Yang, Shusen Li,Ming Li, Wei Ma. “Control of Transverse Corner Cracks on Low Carbon Steel Slabs,”JOM,Vol.66,No.9,2014,pp.1711-1720

6.Ying Ren,Yufeng Wang, Shusen Li, Lifeng Zhang, Xiangjun Zuo, Simon N. Lekakh, Kent D. Peaslee. “Detection of Non-metallic Inclusions in Steel Continuous Casting Billets,” Metallurgical and Materials Transactions B, Vol.45B,No.4,2014,pp.1291-1303

7.Haitao Ling,Lifeng Zhang. “Numerical Simulation of the Growth and Removal of Inclusions in the Molten Steel of a Two-Strand Tundish,”JOM,Vol.65,No.9,2013,pp.1155-1163

8.Wen Yang,Lifeng Zhang, Xinhua Wang,Ying Ren, Xuefeng Liu, Qinglin Shan.“Characteristics of Inclusions in Low Carbon Al-Killed Steel during Ladle Furnace Refining and Calcium Treatment,”ISIJ International,Vol.53,No. 8,pp.1401–1410

9.Jiling Wang,Lifeng Zhang, Shufeng Yang, Yongfeng Chen,Jingyu Li,Alexander Wachsman.“Interaction between Molten Steel, Alumina Lining Refractory and Slag Phase,”Journal of Manufucturing Science and Production,Vol.13,No.1-2,pp.133-143

10.Wen Yang,Xinhua Wang, Lifeng Zhang, Wanjun Wang.“Characteristics of Alumina-Based Inclusions in Low Carbon Al-Killed Steel under No-Stirring Condition,” Steel Research International,Vol.84,No.9,2013,pp.878-891

11.Wen Yang,Xinhua Wang,Lifeng Zhang, Qinglin Shan, Xuefeng Liu,“Cleanliness of Low Carbon Aluminum-Killed Steels during Secondary Refining Processes,” Steel Research International,Vol.84,No.5,2013,pp.473-489

12.Shueng Yang, Lifeng Zhang, Jingshe Li, Kent Peaslee. “Formation and Modification of MgO∙ Al2O3-Based Inclusions in Alloy Steels,” Metallurgical and Materials Transactions B, Vol.43B, No.4, 2012, pp. 731-750

13.Lifeng Zhang, Jianwei Gao, Lucas Nana Wiredu Damoah, David G. Robertson, “Removal of Iron from Aluminum: A Review,” Mineral Processing and Extractive Metallurgy Review, Vol.33, No.2, 2012, pp.99-157

14.Lifeng Zhang, Xuewei Lv, Lucas Nana Wiredu Damoah, Chenguang Bai, “Mathematical Modeling on the Removal of Impurity Elements from Molten Aluminum,” Mineral Processing and Extractive Metallurgy Review, Vol.33, No.1, 2012, pp.1-54

15.Yufeng Wang, Lifeng Zhang. “Simulation of the Fluid Flow-Related Phenomena in the Electrolyte of an Aluminum Electrolysis Cell,” Metallurgical and Materials Transactions B, Vol.42B, No.5, 2011, pp.1051-1064

16.Yufeng Wang, Lifeng Zhang. “Fluid Flow Related Transport Phenomena in Steel Slab Continuous Casting Strands under Electromagnetic Brake,” Metallurgical and Materials Transactions B, Vol.42B, No.6, 2011, pp.1319-1351

17.Alex Luyima, Shi Honglan, Lifeng Zhang. “Leaching Studies for Metals Recovery from Waste Printed Wiring Boards,” JOM, Vol.63, No.8, 2011, pp. 38-41

18.Alex Luyima, Lifeng Zhang, Lucas Damoah. “Kinetic Analysis of the Thermal Degradation of Printed Wiring Boards,” JOM, Vol.63, No.8, 2011, pp. 33-37

19.Lifeng Zhang, Xuewei Lv, Alex T. Torgerson, Mujun Long. “Removal of Impurity Elements from Molten Aluminum: A Review,” Mineral Processing and Extractive Metallurgy Review, Vol.32, No.3, 2011, pp. 150-228

20.L. N. W. Damoah, Lifeng Zhang, “AlF3 Reactive Al2O3 Foam Filter for the Removal of Dissolved Impurities from Molten Aluminum: Preliminary Results,” Acta Materialia, Vol.59, No.3, 2011, pp. 896-913

21.Anping Dong, Lifeng Zhang and Lucas N. W. Damoah, “Beneficial and Technological Analysis for the Recycling of Solar Grade Silicon Wastes,” JOM, Vol.63, No.1, 2011, pp.23-27

22.Mujun Long, Lifeng Zhang. “A Simple Model to Calculate Dendrite Growth Rate during Steel Continuous Casting Process,” ISIJ International, Vol.50, No.12, 2010, pp.1792-1796

23.Yufeng Wang, Lifeng Zhang, “Study on Transient Fluid Flow Phenomena during Continuous Casting: Part I – Cast Start,” ISIJ International, Vol.50, No.12, 2010, pp.1777-1782

24.Yufeng Wang, Lifeng Zhang, “Study on Transient Fluid Flow Phenomena during Continuous Casting: Part II – Cast Speed Change, Temperature Fluctuation, and Steel Grade Mixing,” ISIJ International, Vol.50, No.12, 2010, pp.1783-1791

25.L. N. W. Damoah, Lifeng Zhang, “Inclusion Removal from Aluminum through Filtration,” Metallurgical and Materials Transactions B, Vol.41B, No.4, 2010, pp.886-907

26.Mujun Long, Lifeng Zhang, Xiangjun Zuo, “Kinetic Modeling on Nozzle Clogging during Steel Billet Continuous Casting,” ISIJ International, Vol.50, No.5, 2010, pp. 712–720

27.Shufeng Yang, Lifeng Zhang, Jingshe Li, Kent Peaslee, “Structure Optimization of Horizontal Continuous Casting Tundishes Using Mathematical Modeling and Water Modeling,” ISIJ International, Vol.49, No.10, 2009, pp.1551-1560

28.Lifeng Zhang, Arjan Ciftja, “Recycling of Solar Cell Silicon Scraps through Filtration, Part I: Experimental Investigation,” Solar Energy Materials and Solar Cells, Vol.92, No.11, 2008, pp.1450-1461

29.Lifeng Zhang, Yufeng Wang, Xiangjun Zuo. “Flow Transport and Inclusion Motion in Steel Continuous Casting Mold under SEN Clogging Condition,” Metallurgical and Materials Transactions B, Vol.39B, No.4, 2008, pp.534-550

30.Jirang Cui, Lifeng Zhang, “Metallurgical recovery of metals from electronic waste: A review,” Journal of Hazardous Materials, Vol.159, No.2-3, 2008, pp.228-256

31.Lifeng Zhang, Subo Yang, Kaike Cai, Jiying Li, Xiaoguang Wan, Brian G. Thomas. “Investigation on the Fluid Flow and Steel Cleanliness in the Continuous Casting Strand,” Metallurgical and Materials Transactions B, Vol.38B, No.1, 2007, pp.63-83

32.Lifeng Zhang, Bret Rietow, Brian G. Thomas, Ken Erkin. “Large Inclusions in Plain-Carbon Steel Ingots Cast by Bottom Teeming,” ISIJ International, Vol.46, No.5, 2006, 670-679

33.Lifeng Zhang, Brian G. Thomas, “State of the Art in the Control of Inclusions during Steel Ingot Casting,” Metallurgical and Materials Transactions B, Vol.37B, No.5, 2006, 733-761

34.Lifeng Zhang, Jun Aoki, Brian G. Thomas. “Inclusion Removal by Bubble Flotation in a Continuous Casting Mold,” Metallurgical and Materials Transactions B, Vol.37B, No.3, 2006, pp.361-379

35.Lifeng Zhang, Brian G. Thomas. “State of the Art in Evaluation and Control of Steel Cleanliness,” ISIJ International, 2003, Vol.43, No.3, pp. 271-291

36.Lifeng Zhang, Wolfgang Pluschkell. “Nucleation and Growth Kinetics of Inclusions during Liquid Steel Deoxidation,” Iron & Steelmaking, Vol. 30, No.2, 2003, pp.106-110

37.Lifeng Zhang, Shoji Taniguchi. “Water Model Experiment of Inclusion Removal by Bubble Flotation under Turbulent Condition,” Ironmaking & Steelmaking, Vol.29, No.5, 2002, pp.326-336

38.Brian G. Thomas, Lifeng Zhang. “Mathematical Modeling of Fluid Flow in Continuous Casting: a Review,” ISIJ International, Vol.41, No.10, 2001, pp.1181-1193

39.Lifeng Zhang, Shoji Taniguchi, Cai Kaike. “Fluid Flow and Inclusion Removal in Continuous Casting Tundishes,” Metallurgical and Materials Transactions B, Vol.31B, No.2, 2000, pp.253-266

40.Lifeng Zhang, Shoji Taniguchi. “Fundamental of Inclusion Removal from Liquid Steel by bubble flotation,” International Materials Review, Vol.45, No.2, 2000, pp.59-82

课程

本科：Transport Phenomena in Metallurgy、钢铁冶金学炼钢部分。

担任中国金属学会青年工作委员会副主任委员；美国矿业金属及材料协会(TMS)过程技术与模型委员会主任（Chair of the Processing Technology and Modeling Committee）；Metallurgical&Materials Transactions B、Metallurgical&Materials Transactions A的审稿委员会主任委员（Key Reader）；ISIJInternational的顾问委员会委员（国际编委）（Advisory Board member）；Metallurgical Research & Technology（原名：Revue de Métallurgie）编委；Ironmaking and Steelmaking编委（Member of Editorial Board）；国内杂志《炼钢》《连铸》《钢铁》编委；美国矿物、金属与材料协会（TMS）过程技术与模型委员会主任；中国自然科学基金2007年、2010年参会国际评委（Panelist）；2009年中国教育部长江学者计划国际函评评委；美国自然科学基金会2009 年、2010年、2011年参会评委（Panelist）。^[2]

时间奖项全称具体奖项获奖作品颁奖机构2016年6月1日第十一届光华工程科技奖青年奖---2011国家外专局“引智配套工程”资助获得者--国家外专局2010美国密苏里科技大学杰出科研奖--美国密苏里科技大学2010美国钢铁年会最佳论文奖最佳论文奖-美国钢铁年会2009美国钢铁协会连续铸钢最佳论文奖--美国钢铁协会2007美国材料学会青年领袖奖青年领袖奖-美国材料学会2001美国钢铁年会学会最佳论文奖最佳论文奖-美国钢铁年会学会