钢结构设计规范

《钢结构设计规范》是一本由中国工程建设标准化协会组织编写，中国建筑工业出版社2006年9月1日出版发行的书籍。其主要内容包括总则、术语和符号、基本设计规定、受弯构件的计算、轴心受力构件和拉弯、压弯构件的计算、疲劳计算、连接计算、构造要求、塑性设计、钢管结构、钢与混凝土组合梁等钢结构方面的知识，可供查阅学习。

General principles，Terms and symbols，Basic design stipulations，Calculation of flexural members，Calculation of axially loaded members and members subjected to combined axial load and bending

1 General principles2 Terms and symbols2 Terms and symbols2.1 Terms2.2 Symbols3 Basic design stipulations3.1 Design principles3.2 Load and calculation of load effects3.3 Material selection3.4 Design indices3.5 Provisions for deformation of structures and structural members4 Calculation of flexural members4.1 Strength4.2 Overall stability4.3 Local stability4.4 Calculation of built-up girder with webs taking accout of post-buckling strength5 Calculation of axially loaded members and members subjected to combined axial load and bending　5.1 Axially loaded memb5.2 Members subjected to combined axial load and bendingers5.3 Effective length andallowable slenderness ratio5.4 Local stability of compression members6 Fatigue calculation6.1 General stipulations6.2Fatigue calculation7 Calculation of connections7.1 Welded connection7.2 Fastener connection7.3 Flange connection of built-up I-section7.4 Beam-to-column rigid connection7.5 Calculation of connected plates at joints7.6 Supports8 Detailing requirements8.1 General stipulations8.2 Welded connection8.3 Bolted riveted connections8.4 Structural members8.5 Requirements for crane girders and crane trusses8.6 Large span roof structures8.7 Requirements for preventing brittle fracture under low temperature8.8 Fabrication, transportation and erection8.9 Protection and heat insulation9 Plastic design9.1 General stipulations9.2 Calculation of members9.3 Allowable slenderness ratio and detailing requirements10 Steel tubular tructures10.1 General stipulations10.2 Detailiing requirements10.3 Capacity of members and joints11 Composite steel and concrete beams11.1 General stipulations11.2 Design of compolite beams11.3 Calculation of shear connectors11.4 Calculation of deflection11.5 Detailing requirementsAppendix A Allowable deflection of structures of structural membersAppendix B Overall stability factor of beamsAppendix C Stability factor of axial compression memebersAppendix D Effective length factor for columnsAppendix E Classification of memebers and connections for fatigue calculationAppendix F Stability calculation of truss gusset plate subject to compressive force of the diagonalweb memberExplanation of wording in this Code ---